Phone(s): 306-445-2427 306-441-5431

Box 157 HWY 4 N, NORTH BATTLEFORD SK
NORTH BATTLEFORD Saskatchewan
S9A 2Y1

Bauma Light MP972

Specifications

Model	MP972	Year	2023	Sale Type	New
Manufacturer	Bauma Light	Quantity	0	Manufacturer Qty	0
Price	Contact for price CAD	Hitch Size	CAT 2 or 3	Path Width	84"
Drive Speed	1,000	Rotor Width	72"	Unit Weight	3200 lbs
Cutting Depth	Level to 2.5" Below Grade	Cutting Style	Double Tipped	Maximum PTO HP	125
Rotor Shaft Size	2"	Maximum Engine HP	135	Minimum Engine HP	90
Number Of Cutters	43	System Protection	Slip Clutch	Tooth Part Number	R9000
Gearbox Spline Size	1-3/8"	Hydraulic Requirements	2 Remotes	Tractor End Spline Size	1-3/8"
Quick Hitch Compatibility		Rotor Weight (with Tools)	1,105 lbs	Rotor Diameter (tool Tips)	18.5"

Description

MP972 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 900 series Baumalight mulchers will efficiently mulch heavy brush and trees and are designed for contractors, rental and any other heavy duty mulching and land clearing. The MP972 masticating head Brush Mulcher is designed to fit tractors with 90 - 135 HP and Cat 2 or 3 3PH. The 900 Series teeth are available in either Ripper or Planer style. The carbide Ripper tooth is the good general use tooth. Their v-shaped design shreds through brush and makes them less vulnerable in areas plagued by rocks and debris. The 900 Series Planer style tooth provides the most efficient cutting by smoothly chipping away at the brush. Its flat profile however makes it vulnerable to shattering on impact with rocks and other debris. Tractor mounted brush mulchers are not limited to reverse only, drive forward over your mulch and turn it into a finer mulch. A usefull feature on the Baumalight MP972 Brush Mulcher is the opening cutting shield. This allows you to adjust for a better, higher angle of attack on bigger brush or keep it closed and control the mulch for even finer results. With direct drive from the engine, all the way through the heavy duty gear box, to the teeth, the MP972 PTO Brush Mulcher is a very efficient way to clear heavy brush and small trees.

FEATURES

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership

REPLACEABLE BOLT-IN LINER

Save time by easily replacing the AR400 steel wear plates on the ms960 without needing to remove the rotor.

WIRE PROTECTION KIT

If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.

CHAIN CURTAIN

The rear of the unit is guarded by a 3/8" thick chain curtain so standing brush enters and mulched debris exits.

EASY ACCESS GREASE FITTINGS

Reduce your regular maintenance time by easily greasing the bearings on the MP972 from outside the frame. No tools required.

SLIP CLUTCH

To protect the gearbox and drive system, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

HEAVY DUTY GEARBOX

Heavy duty gearbox for high performance and better mulching power and long life.

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

GREASEABLE PINS

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.

HARDENED STEEL BUSHING

Spring Bushing made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.

ADJUSTABLE BELT TENSIONER

The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.

Directional felling hook

Built into the pusher bar, the directional felling hook will directionally control wayward trees, sprawling clumps and low hanging limbs.

heavy duty frame

Now completely redesigned for the 900 series Brush Mulcher, the heavy duty steel frame is constructed with T1 alloy tool steel sheet metal.

BACK HYDRAULIC DOORS

The MP972 is the only Baumalight mulcher with an adjustable back door, this can be raised for forward driving with ground engagement and lowered for backward driving into the brush.

FRONT HYDRAULIC DOOR

Equipped with front and rear hydraulically controlled debris doors. They are controlled from the cab to give the operator more control of the mulching action. When front door is closed, the mulch debris is more controlled and a finer mulch is produced. Open the rear door to better attack stubborn brush by exposing more of the rotor.

Integrated push bar

When push comes to shove, the integrated push bar helps control

Powdered Coated

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

6 FREE TEETH

All MP972 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be convenienty stored in the enclosed spare tool compartment.

Double shielded hoses

All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection.