Every inch of the RoGator^® cab has been designed to maximize your riding experience—and your efficiency.

• Ergonomic armrest for more comfort and control, and easier access to sprayer controls.
• Flat-folding booms for unmatched visibility on the road.
• Six-post cab design provides a clear view to the boom tip, regardless of length.
• Triple filtration system includes a prefilter and a charcoal cab filter to keep your environment virtually dust-, chemical- and odor-free.
• Recirculation filter keeps cab air clean, and a pressurizing fan maintains positive interior air pressure so unfilte air can’t get in.

The horsepower, torque and fuel economy to handle any terrain with ease—all while meeting emission compliance regulations.

• RG1100C/1300C: AGCO’s selective catalytic reduction (SCR) emissions technology in combination with cooled exhaust gas recirculation (cEGR) achieves Tier IV Final (T4F) emission regulation on the AGCO Power 84 AWF engines.
• RG900C: Uses the 74 AWF AGCO Power^TM engine and will only utilize the SCR system to meet emissions standards, ensuring increased power density and total fluid economy with an efficient after-treatment of exhaust gases.  

Capabilities: Drive in a standard position with 2WS or minimize turn radius with either the 4WS or 4WS Auto.  Use Crab steering to avoid field obstacles while maintaining precise even coverage.

Reduce Compaction: Initial tire paths compact soil by 80%, making it essential to reuse them whenever possible. GatorTrak 4-wheel steer maintains rear wheels in front wheel paths, reducing compaction in end rows and headlands. 

Minimizes Crop Damage: A tight 16 ft. turning radius means far fewer rows are crossed and compaction is reduced, significantly reducing crop damage and enhancing yields.

Save Time and Improve ROI: For those without headlands, a standard 2-wheel steer machine may require a three-point turn after each pass. If each turn takes an average of 18 seconds, and an average field is 80 acres, with GatorTrak 4-wheel steering you could cover an additional 100 acres per day or 4,500 acres per year.

Save Time and Improve ROI: For those without headlands, a standard 2-wheel steer machine may require a three-point turn after each pass. If each turn takes an average of 18 seconds, and an average field is 80 acres, with GatorTrak 4-wheel steering you could cover an additional 100 acres per day or 4,500 acres per year

A rugged, self-contained GNSS receiver and antenna with GPS and SBAS support. Base GPS option is SBAS but can be upgraded for higher accuracy levels.

A high-performance, dual-frequency GPS and GLONASS smart antenna receiver for very high levels of accuracy and performance. Base correction source is SBAS but can be upgraded for higher accuracy levels. (Show Trible chart)

Pressure-based system for precise application available through parts. Each nozzle is controlled by an individual pulsing valve to give a consistent spray pattern as speed and conditions change. 

• Extended speed range from nozzle tips maintain consistent droplet size and spray pattern for maximized field speeds.
• Nozzle-by-nozzle turn compensation adjusts duty cycle to minimize over- and under-applications
• Multiple pressure settings allow for application pre-planning with lower pressure for sensitive areas and normal pressures for field interiors.
• The base package provides 16-section control regardless of boom width.  The optional HD unlock increases OptiPulse accuracy with individual nozzle cont
• Individual valve diagnostics

Fully scalable steering solution that combines Slingshot, GPS and auto steer into one intuitive, easy-to-use unit with incredible accuracy at both high and low speeds

• Requires in-field calibration, only for different crop widths.
• Three control modes for accurate steering include:
• GPS/GNSS Mode—uses traditional guidance lines.
• VSN Mode—Will only use the VSN camera.
• VSN+ Mode—Will fall back to GPS last pass if it cannot detect the crop row due to weed pressure or drown out.

When crops are too tall to effectively see the row, the Raven VSN Full Canopy solution compliments the VSN system with a non-contact radar sensor that detects stalked crops, such as corn, to keep the machine in between rows. Available through AGCO Parts. 

• Mounted to the bottom of each front wheel leg and can detect rows when crops are too tall for the standard Fendt Vision system to identify the crop row.
• Detects multiple rows to keep the machine on track, even with row skips.  Permits application speeds of up to 20 mph with a minimum row spacing of 30 in.  

Included with the purchase of VSN, automatically performs headland turns without the operator’s input, allowing them to prepare for the next pass

Suite of connected hardware, software and logistical services that optimize planning, executing and recording field applications. This system delivers high levels of connectivity to RTK correction signals, online services, sophisticated data management capabilities and live in-field support and service. 

Fast and simple way to set up nearly all parameters of an operation ahead of time and send it out to the machine. 

Harnesses Slingshot to allow multiple machines to collaborate on a job simultaneously or days apart—a powerful tool that practically eliminates the potential for overlap or misapplication between multiple machines in the same field.

Flexible and scalable tool that leverages Slingshot’s data transfer power to streamline otherwise complex tasks, such as work order management, dispatch and asset control, reports and notifications, and filing data management.

Agro Link relieves you of the data management burden by collecting, integrating and storing agronomic files—so you can focus on more important tasks.

• Save time and effort by consolidating current and historic agronomic data into a single location and file type, easily converting ISO XML files to shapefiles or vice versa.
• Simplify data sharing with trusted advisors to help your operations run more efficiently.
• Move data between cloud storage, equipment telematics and your FMIS. IMG AgroLink
• Securely store and transfer data in one unified file type on your computer or mobile device. 
•  API-connected partners give AgroLink flexibility to collaborate with independent systems; partners include: MyJohnDeere, Case AFS Connect, New Holland PLM Connect, Ag Leader AgFiniti, Raven Slingshot, AgBridge, Climate Fieldview, Farmmobile, Beck’s Farm Server, and more

Take the guesswork out of machine optimization with AGCO Connect. Track individual and fleet performance and know where, how and when you can make the most of your machines.